Haulotte HA20RTJ O, Руководство оператора

Страница: 65 / 112

A
B
C
D
E
F
G
H
I
65 4000388880 E 06 15 GB / USA
D
- Operation instructions
HA20RTJ - HA20RTJ O - HA20RTJ PRO - HA61RTJ O - HA61RTJ PRO
Operation instructions
1 - Operation
1.1 - I
NTRODUCTION
Aerial Work platforms are equipped with two control boxes which allow operators to safely use
the machine.
An auxiliary device is available at the ground control box to assist in the rescue of people in an
emergency.
Each control box is equipped with an E-Stop button, which allows operators to stop all
movements, if necessary.
Only trained and authorized personnel shall be permitted to operate this aerial work platform.
Prior to operation :
• Read, understand and obey all instructions and safety precautions in this manual and
attached to the aerial work platform.
• Read, understand and obey all Federal, State and local codes and regulations.
• Become familiar with the proper use of all controls and emergency systems.
1.2 - O
PERATION FROM THE GROUND CONTROL BOX
• Turning "ON" and "OFF" of the machine is performed with selector key switch (18).
• Activation of a desired control box is achieved by turning the control box energizing selector
switch ( 229 ) to the desired position.
• The ground control box is energized and is active ONLY when :
• The E-stop buttons on both ground and platform control boxes are not pressed in
(Deactivated).
• Machine is switched on by turning ON/OFF selector key switch ( 18 ) at the ground
control box to ( ON ) position.
• An E-Stop button at each control box stops all movements when pressed in; including
shutting off an engine (if equipped).
N.B.-:-DO NOT
TURN OFF THE POWER SUPPLY OF THE MACHINE USING THE
E-
STOP BUTTON
(U
SE
ONLY
IN CASE OF EMERGENCY
). T
URN OFF THE POWER SUPPLY OF THE MACHINE USING THE
CONTROL
ON/OFF ( 18 )
FROM THE GROUND CONTROL BOX
.
• An enable switch ( 228 ) is present that should be activated and maintained to authorize one
or more movements. If enable switch ( 228 ) is kept engaged without selecting a function
movement for more than 8 s; enable switch is automatically de-activated
• The release of control box enable switch while performing a movement stops all the
movements. The function movement is progressively slowed down. If the enable switch is
re-pressed, the function movement does not restart. The function movement can only
selected when the corresponding function switch or joystick is returned to neutral position.
• All switches and joystick operating a movement, return automatically to neutral when
released.
• At power up, all switches and joysticks must be in their neutral position.