Haulotte Group xlb-4725a Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 118

Haulotte Group xlb-4725a Скачать руководство пользователя страница 114

HAULOTTE GROUP

9 ANSI REPRINT

114

9.1 Basic

principles.

Sound principles of safety, training

inspections, maintenance, application, and operation
consistent with all data available regarding the
parameters of intended use and expected environment
shall be applied in the performance of responsibilities of
lessors with due consideration of the knowledge that the
aerial platform will be carrying personnel.

9.2

Lessor as a Dealer.

When a lessor uses the aerial

platform as a dealer, the lessor shall have the
responsibilities of dealers as specified in Section 5 of this
standard.

9.3

Lessor as an Owner.

When a lessor uses the aerial

platform as an owner, the lessor shall have the
responsibilities of owners as specified in Section 6 of this
standard.

9.4

Lessor as a User.

When a lessor uses the aerial

platform as a user, the lessor shall have the
responsibilities of users as specified in Section 7 of this
standard.

9.5

Lessor as an Operator.

When a lessor uses the aerial

platform as an operator, the lessor shall have the
responsibilities of operators as specified in Section 8 of
this standard.

10

Responsibilities of Lessees

10.1 Basic

Principles

. Sound principles of safety, training,

inspections, maintenance, application, and operation
consistent with all data available regarding the
parameters of intended use and expected environment
shall be applied in the performance of responsibilities of
lessees with due consideration of the knowledge that the
aerial platform will be carrying personnel.

10.2

Lessee as a Dealer.

When a lessee uses the aerial

platform as a dealer, the lessee shall have the
responsibilities of dealers as specified in Section 5 of this
standard.

10.3

Lessee as an Owner.

When a lessee uses the aerial

platform as an owner, the lessee shall have the
responsibilities of owners as specified in Section 6 of this
standard.

10.4

Lessee as a User.

When a lessee uses the aerial

platform as a user, the lessee shall have the
responsibilities of users as specified in Section 7 of this
standard.

10.5

Lessee as an Operator.

When a lessee uses the aerial

platform as an operator, the lessee shall have the
responsibilities of operators as specified in Section 8 of
this standard.

11

Responsibilities of Broker

11.1

Responsibilities upon sale.

The broker shall:

(1) Upon delivery, ensure the operating and

maintenance manuals are provided to the new
owner.

(2) Upon delivery, provide a copy of the current Manual

of Responsibilities to the new owner.

(3) Maintain records of the sale for a minimum of four

(4) years.

11.2 Responsibilities with Re-rents, Leases, or Any Other

Form of Beneficial Use.

When compensation is

received as a result of a re-rent, lease or any form of
beneficial use of an aerial platform, the broker shall:

(1) Upon delivery, ensure the operating and

maintenance manuals are provided to the user.

(2) Upon delivery, provide a copy of the current Manual

of Responsibilities.

(3) Ensure operating personnel are familiarized with

the aerial platform prior to use.

(4) Retain records of the transaction for a minimum of

four (4) years.

Figure 9-1. Minimum Safe Approach Distance

DENOTES

PROHIBITED

ZONE

«
...
112
113
114
115
116
...
»

Содержание xlb-4725a























































































































Отзывы:

Нет отзывов