Haulotte Group xlb-4725a, Руководство по техническому обслуживанию оператора, Страница: 111 / 118

HAULOTTE GROUP 9 ANSI REPRINT
111
(37) Protecting against unauthorized use. The user shall
direct the operator not to use, rent, lease, or
provide the aerial platform for any form of beneficial
use unless so authorized.
7.11 User as Operator. If a user is also the operator of an
aerial platform, the user shall have the responsibilities of
operators specified in Section 8 of this standard as well
as responsibilities of users as specified in Section 7 of
this standard.
7.12 Shutdown of Aerial Platform. The user shall authorize
and direct the operating personnel to cease operation of
the aerial platform in case of any suspected
malfunction(s) of the aerial platform, or any hazard or
potentially unsafe condition(s) that may be encountered
and to request further information as to safe operation
from the owner, dealer, or manufacturer before further
operation of the aerial platform.
7.13 Record Retention and Dissemination.
7.13.1 Record Retention. The user shall retain the following
records for at least 4 years:
(1) Names of the operator(s) trained and retrained.
(2) Names of operator(s) provided familiarization.
(3) The owner (or the entity designated by the owner)
is responsible to ensure frequent and annual
inspections are conducted and written records are
maintained. The records shall include the date of
the inspection, any deficiencies found, the
corrective action recommended and identification of
the person(s) performing the inspection.
(4) When employees of the user accomplish repairs on
the aerial platform, the user shall maintain written
records. The record shall include the date of repair,
a description of the work accomplished and
identification of the person(s) performing the repair.
7.13.2 Record Dissemination
(1) When the user directs personnel to accomplish
frequent or annual inspections, not later than 60
days after the inspections, the appropriate records
shall be provided to the owner of the aerial
platform.
(2) When the user directs personnel to accomplish
repairs on the aerial platform, not later than 60 days
after the repairs are accomplished, the appropriate
records shall be provided to the owner.
7.13.3 Proof of Training. Users providing training should
provide successful trainees a means to evidence their
training and shall provide such proof if requested by the
trainee.
The document evidencing training shall include the
following information:
(1) Name of entity providing training or retraining.
(2) Name of trainer(s).
(3) Clear identification that training covered Boom-
Supported Elevating Work Platforms.
(4) Date of training.
(5) Name of trainee.
7.14 Modifications. Modification, alteration or remanufacture
of an aerial platform shall be made only with prior written
permission of the manufacturer.
7.15 Manufacturer’s Safety Bulletins. The user shall comply
with safety related bulletins as received from the
manufacturer, dealer, or owner.
8 Responsibilities of Operators.
8.1 Basic Principles. The information in this standard shall
be supplemented by good judgment, safety control, and
caution in evaluating each situation. Since the operator
is in direct control of the aerial platform, conformance
with good safety practices in this area is the
responsibility of the operator. The operator shall make
decisions on the use and operation of the aerial platform
with due consideration for the fact that his or her own
safety as well as the safety of others is dependent on
those decisions.
8.2 Manuals.
8.2.1 Machine Manuals. The operator shall ensure the
operating and maintenance manuals are stored in the
weather resistant storage compartment on the aerial
platform. The manual(s) is considered an integral part of
the aerial platform and is vital to communicate necessary
safety information to the operator. The operator shall be
familiar with the manuals and reference them as
required.
8.2.2 Manual of Responsibilities. The operator shall be
familiar with the requirements for operators as set forth
in Section 8 of the Manual of Responsibilities for
Dealers, Owners, Users, Operators, Lessors, Lessees
and Brokers of Boom-Supported Elevating Work
Platforms. The current Manual of Responsibilities shall
be kept with the aerial platform at all times and stored in
the weather-resistant compartment when not in use.
8.3 Prestart Inspection. Before use each day or at the
beginning of each shift, the aerial platform shall be given
a visual inspection and functional test including, but not
limited to, the following:
(1) Operating and emergency controls
(2) Safety devices
(3) Personal protective devices
(4) Air, hydraulic and fuel system(s) leaks
(5) Cables and wiring harness
(6) Loose or missing parts
(7) Tires and wheels
(8) Placards, warnings, control markings and operating
manual(s)
(9) Outriggers, stabilizers, extendable axles and other
structures
(10) Guardrail system
(11) Items specified by the manufacturer
8.4 Problems or malfunctions. Any problems or
malfunctions that affect the safety of operations shall
be repaired prior to the use of the aerial platform.
8.5 Training, Retraining, and Familiarization
8.5.1 General Training. Only personnel who have received
general instructions regarding the inspection, application
and operation of aerial platforms, including recognition
and avoidance of hazards associated with their
operation, shall operate an aerial platform. Such items
covered shall include, but not necessarily be limited to,
the following issues and requirements:
(1) The purpose and use of manuals.
(2) That operating manuals are an integral part of the
aerial platform and must be stored properly in the
weather resistant compartment when not in use.
(3) A pre-start inspection.
(4) Responsibilities associated with problems or
malfunctions affecting the operation of the aerial
platform.
(5) Factors affecting stability.
(6) The purpose of placards and decals.
(7) Workplace inspection.