![background image](http://html.mh-extra.com/html/harvard-bioscience/btx-hybrimune/btx-hybrimune_user-manual_601890007.webp)
7
Hybrimune Hybridoma Production System
Publication 015-1010191 Rev 4.0 • www.btxonline.com
Caution Risk
of Electric Shock
Caution
Protective
Ground Terminal
High Voltage Risk
These instruments contain a high voltage power supply adjustable
to 1,000 V. High voltage power supplies present a serious risk of
personal injury if not used in accordance with design and/or use
specifications, if used in applications on products for which they
are not intended or designed, or if they are used by untrained or
unqualified personnel.
• The user must read this manual carefully before the
instruments are placed into operation.
• Removing the cover will void the warranty.
• Do not connect or disconnect the high voltage cable with the
high voltage enabled.
• To connect or disconnect the cable, turn line power off and
unplug line (mains) cord.
• Do not touch the electrode tip while the waveforms are
being applied.
• Do not under any circumstances turn the power switch off
while the system is pulsing; if an emergency occurs push the
emergency button on the front panel
If there are any questions about the operation of this instrument,
call BTX Customer service at 1-800-272-2775, or 1-508-893-8999.
Caution Notice
The BTX Hybrimune Systems are intended for laboratory use
only and can be used in research and development applications.
These systems have been designed to meet the standards for
electromagnetic compatibility (EMC) intended for laboratory
equipment applications as well as the applicable safety
requirements for electrical equipment for measurement, control,
and laboratory use. The unit itself does not generate waste, but
may be used to treat samples that are hazardous. Please use
appropriate PPE and ensure disposal in accordance with local
regulations and practices.
This product should not be used in the presence of a flammable
atmosphere such as an anesthetic mixture with air, oxygen, or
nitrous oxide.
Please read the following safety precautions to ensure proper
use of your generator. If the equipment is used in a manner not
specified, the protection provided by the equipment may be
impaired.
To Prevent Hazard or Injury
Emergency Stop
If a problem occurs during a run, push the STOP/RESET button on
the front panel.
Use Proper Line Cord
Use only the specified line cord for this product and make sure line
cord is certified for country of use. The operating voltage range for
the Hybrimune is 100 to 240 VAC, 50/60 Hz.
Ground the Product
This product is grounded through the grounding conductor of the
power cord. To avoid electric shock, the grounding conductor must
be connected to earth ground. Before making any connections
to the input or output terminals of the product, ensure that the
product is properly grounded.
Make Proper Connections
Make sure all connections are made properly and securely. Any
signal wire connections to the unit must be no longer than three
meters.
Observe All Terminal Ratings
Review the operating manual to learn the ratings on all
connections.
Use Proper Fuse
Use only specified fuses with product.
Avoid Exposed Circuitry
Do not touch any electronic circuitry inside of the product.
Do Not Operate with Suspected Failures
If damage is suspected on or to the product do not operate the
product. Contact qualified service personnel to perform inspection.
Orient the Equipment Properly
Do not orient the equipment so that it is difficult to operate the
disconnection device.
Place Product in Proper Environment
Review the operating manual for guidelines for proper operating
environments.
Observe All Warning Labels on Product
Read all labels on product to ensure proper usage.
Safety Information