Harris NXAMP3801HDI, Руководство по установке оборудования и инструкция пользователя

Страница: 35 / 76

NXAMP3801HDX/HDI
NEXIO AMP Generation 6 Hardware Installation and User Guide
35
175-100423-00
Connecting NXAMP3801HDX/HDI Redundant Power Supplies

The NXAMP3801HDX/HDI comes with two power cords that must be only plugged into grounded
electrical outlets

The NXAMP3801HDX/HDI must be connected to an IT power system. In all cases, make sure that the
NXAMP3801HDX/HDI is also reliably connected to Earth (ground).

It is essential that both power supply modules be connected at all times to your AC.

For extra insurance against power failure loss, you might want to connect the two power supply
modules to AC outlets on different circuit breakers or connect the system to an Uninterruptible Power
Supply (USP).
Prevent Damage and Malfunction
Read and observe all instructions in this section to keep your system working safely and effectively.
Hardware
Do NOT modify the hardware. Your system is delivered with all the necessary hardware and software already
installed. You should not have to remove the chassis cover, however, if the system case is damaged, refer to
Chassis Cover on page 61 and verify that all components are still properly seated and connected. Installing
additional hardware or modifying the hardware in any way can compromise the operation of your system.
CAUTION - Regardless of how many hard drives are installed, all drive carriers must remain in the
drive bays to maintain airflow.
Anti-Virus Software
If any anti-virus software is required on your NXAMP3801HDX/HDI, Harris recommends that you install
Microsoft Security Essentials and only configure it to monitor incoming and outgoing data.
Harris supports regular manual or scheduled scans on Server systems, during known off-line time periods
when the software is not on-air or actively in use. Under these conditions, Harris agrees that such scans may
be conducted while software applications are running but are not performing editing, playback, output, or
other productive operations.
Any application or service which consumes system resources (including but not limited to system hard drive
access, CPU cycles, and RAM or primary system bus traffic) will negatively impact the performance and
operational status of the software. Such conditions may impair your Server system from meeting its
operational requirements.
Operating System Updates
To assure the operation, service, technical support, and maintenance of Harris Server systems on known
tested and qualified operating system configurations, customers should not install any operating system
updates on Server systems unless formally notified by Harris to do so. Harris tests and verifies software
releases using current updates immediately prior to release, and are confident of the operation of the
updates as of that date.
Customers who do install additional operating system updates on Server systems waive the right for Harris
support to assist with any updates which have not been formally approved by Harris. Furthermore, Harris
service representatives may require the removal of any operating system updates which have not been
formally approved by Harris for use on Server systems, before offering assistance with troubleshooting and
providing service, technical support, or maintenance.