Harris NXAMP3801HDI, Руководство по установке оборудования и инструкция пользователя

Страница: 14 / 76

Chapter 1
Introduction
14
175-100423-00
Remote GPI Control
Table 1-10 and Table 1-11 describes the GPI control specifications for the NXAMP3801HDX/HDI:
Table 1-10 GPI output Specifications for the NXAMP3801HDX/HDI
Item Symbol Rating Unit
OUT 8 outputs (16 pin connector)
Load voltage (AC peak/DC) VOFF 20 VAC
Continuous load current IO 450 mA
ON resistance .8 ohms (typical)
5pF
Information correct according to data obtained by OMRON.
WARNINGS:
1 Be sure to turn OFF the power when wiring the Relay, otherwise an electric shock may be
received.
2 Do not apply overvoltage or overcurrent to the I/O circuits of the SSR, otherwise the SSR may
malfunction or burn.
Table 1-11 GPI input Specifications for the NXAMP3801HDX/HDI
Item Symbol Rating Unit
IN 8 inputs (16 pin connector)
Forward current-continuous IF 60 mA
Forward Current-Peak IF (pk) 1.0A A
Reverse Voltage VR 6.0 V
LED Power Dissipation @ TA=25
ºC
PD 150 mW
Information correct according to data obtained by Fairchild
Remote Serial Interface
The following is a list of the remote serial interface specifications for NXAMP3801HDX/HDI:

RS-422 ports for control of up to eight channels; one port can be allocated for a VTR

RJ-12 connector

Harris ADC VDCP pinout. Refer to Chapter 4, Connector Pinouts on page 37.