Harris NXAMP3801HDI, Руководство по установке оборудования и инструкция пользователя

Страница: 28 / 76

Chapter 2
Chassis Components
28
175-100423-00

USB thumb drives
NXAMP3801HDX/HDI supports USB 1.0, 1.1, and 2.0.
Refer to the NXUSBLTC User Guide for support of one LTC input per channel and one LTC output per channel.
NXUSBLTC is ideal if you want to preserve LTC input timecode from VTRs and other sources, and if you are using
downstream devices that require an LTC input, such as closed caption inserters.
RS232
There is one serial port designated for RS232 communication. This port can be used with a supported Time
Code Corrector module to lock the NXAMP3801HDX/HDI server system to your house time reference. For more
information, see the
NXUSBTC User Guide and your Adrienne AEC Box (NXUSBTC) documentation.
Fibre Channel (HDX Only)
Orange fiber optical cables (provided) are used to connect the frame to shared storage. These connections are
used to pass video and audio data to and from the ingest and playback channels.
PORT 0 — Used for primary connection to storage.
PORT 1 — Use only if directed by your system design.
DVI 1/ DVI 2
The NXAMP3801HDX/HDI has two available DVI ports allowing you to simultaneously connect two monitors to
the system.
DVI-I (Digital Visual Interface- DVI 1 ) is the primary DVI port. DVI-D (Digital Visual Interface- DVI 2 ) is optional. If
the DVI-D connection is used, it supports spanning of the desktop or a second simultaneous instance of the
desktop.
Ethernet
NXAMP3801HDX/HDI is equipped with four Ethernet ports, labeled Ethernet 1, Ethernet 2, Ethernet 3, and
Ethernet 4. Each port is 10/100/1000 Mbps capable with full autonegotiation. The ports may be flexibly used
for NEXIO LAN, Media Host LAN, FTP, Proxy, and Protocol (control). Full duplex operation is always preferred for
networks and is required for the NEXIO LAN. Category 5, 5e, or 6 cables must be used at 100 Mbps operation,
and Category 5e or 6 cables are required for operation at 1000 Mbps.
GPI Ports
The NXAMP3801HDX/HDI provides two Weidmüller GPI connectors.
GPI IN (8-1) — There is one GPI IN connector which manages 8 GPI input triggers. Inputs can be used to
trigger playlist functions such as play, stop, and record of each channel.
GPI OUT (8-1) - There is one GPI OUT connector which manages 8 GPI output triggers. Outputs can be
programmed to trigger certain events in the Playlist and to indicate a RAIDset error.