Harman Soundcraft Si Performer 1 Скачать руководство пользователя страница 33

Страница: 33 / 135

User Manual

5.2: DEFAULT PATCHING

INPUTS AND OUTPUTS > DEFAULT PATCHING

5.2: INPUTS & OUTPUTS > DEFAULT PATCHING

The default patching for Si Performer consoles - also shows default Fader Layers in brackets.

The console patching can be reset to default via the SYSTEM menu. VCA and DMX master assign

ments are also shown for convenience, though there is no audio patching for these. For DMX Fader

Layers use ALT + A, B, C, or D FADERS buttons (see section 13).

Si Performer 1

• Mic In 1-14 > Input Channels 1-14 (Fader Layer A, slots 1-14).

• Mic In 15-16 > Input Channels 15-16 (Fader Layer B, slots 1-2).

• Unassigned inputs x 4 > Input Channels 17-22 (Fader Layer B, slots 3-6).

• Line Inputs 1-8 > Stereo Input Channels 1-4 (Fader Layer B, slots 7-10).

• Stereo FX Returns 1-4 > Stereo Inputs 5-8 (Fader Layer B, slots 11-14).

• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).

• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).

• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).

• MONO > Not Assigned (MONO/SEL Fader).

• VCA Group Masters 1-8 > Not Assigned.

• DMX Masters A-D > (Fader Layer D, slots 11-14).

Si Performer 2

• Mic In 1-22 > Channels 1-22 (Fader Layer A, slots 1-22).

• Mic In 23-24 > Channels 23-24 (Fader Layer B, slots 1-2).

• Unassigned inputs x 12 > Channels 25-38 (Fader Layer B, slots 3-14).

• Line Inputs 1-8 > Channels Stereo Input Channels 1-4 (Fader Layer B, slots 15-18).

• Stereo FX Returns 1-4 > Stereo Input Channels 5-8 (Fader Layer B, slots 19-22).

• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).

• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).

• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).

• MONO > Not Assigned (MONO/SEL Fader).

• VCA Group Masters 1-8 > (Fader Layer C slots 15-22)

• DMX Masters A-D > (Fader Layer D slots 19-22).

Si Performer 3

• Mic In 1-30 > Channels 1-30 (Fader Layer A slots 1-30).

• Mic In 31-32 > Channels 31-32 (Fader Layer B slots 1-2).

• Unassigned inputs x 20 > Channels 33-54 (Fader Layer B slots 3-22)

• Line Inputs 1-8 > Stereo Input Channels 1-4 (Fader Layer B slots 23-26).

• Stereo FX Returns 1-4 > Channels Stereo Input Channels 5-8 (Fader Layer B slots 27-30.

• MIXES 1-14 > Analogue Line Out 1-14 (Fader Layer C slots 1-14).

• MTX 1-4 > Not Assigned (Fader Layer D slots 1-4).

• Main L&R > Analogue Line Out 15-16 (Master L&R Fader).

• MONO > Not Assigned (MONO/SEL Fader).

• VCA Group Masters 1-8 > (Fader Layer C slots 15-22)

• DMX Masters A-D > Fader Layer D slots 27-30).

Содержание Soundcraft Si Performer 1








































































































































Результаты поиска

Содержание Soundcraft Si Performer 1

Отзывы:

Harman Soundcraft Si Performer 1, Руководство пользователя, Страница: 33 / 135

Результаты поиска

Содержание Soundcraft Si Performer 1

Отзывы: