User Manual
10.2.1: DELAY PARAMETERS
LEXICON FX > DELAYS > DELAY PARAMETERS
10.2.1: LEXICON FX > DELAYS > DELAY PARAMETERS
Smear
Ducking attenuation amount.
Available only for Tape and Reverse Delays, this parameter controls the amount of “smear,” or signal degradation
and frequency loss. The higher the setting, the more each delay repeat loses intelligibility compared to the original
signal.
Ratio - Tap Ratio
Controls the Tap ratio of left and right outputs relative to the Delay time.
Specific to the Pong Delay effect, this controls the delay time offset between left and right taps, expressed as a
ratio of left to right time difference. In the centre the taps have the same time (1:1).
Swap - Tap Swap
Swaps the delay time tap offset set by the Tap Ratio.
Specific to the Pong Delay effect - reverses the offset set by the Tap Ratio control.
Depth - Modulation Depth
Control the intensity of modulation, or “depth” in the Modulated Delay.
Lower settings produce a more subtle chorus effect, while higher values give a more lush chorusing of the delay
repeats.
Pan - Tap Pan
Adjust the pan positions in the stereo field of Tap 1 and Tap 2.
Mix
Ratio of Wet to Dry signal.
100% is fully wet (effect) signal; 0% is fully dry (original) signal.
Содержание Soundcraft Si Performer 1
Страница 1: ...User Guide v2 0 For Soundcraft Si Performer 1 2 3 Incorporating Software version 1 6...
Страница 40: ...User Manual 6 1 INPUT CHANNELS CHANNELS BUSSES INPUT CHANNELS 6 1 CHANNELS BUSSES INPUT CHANNELS...
Страница 44: ...User Manual 6 2 MIX OUTPUTS CHANNELS BUSSES MIX OUTPUTS 6 2 CHANNELS BUSSES MIX OUTPUTS...
Страница 48: ...User Manual 6 3 MATRIX OUTPUTS CHANNELS BUSSES MATRIX OUTPUTS 6 3 CHANNELS BUSSES MATRIX OUTPUTS...
