Harman P35I, Руководство пользователя по установке и эксплуатации

Страница: 32 / 50

32 Save These Instructions 3-90-775R36_09/15
d. Un-latch and remove the ash pan. Dispose of the ashes
in a metal container with a tight fitting lid.
e. Remove the two (2) corner cleanout covers by removing
the wing-screws (one per).
Vacuum or brush exhaust passage
6. Inspect / Clean Hopper
• Frequency: Whenever run to empty
• By:
User
Whenever the hopper is empty, inspect and remove
any large amounts of sawdust or fines. Although this
finer material will mostly feed through with the fuel, large
quantities of sawdust may restrict feeder flow.
l. Before reinstalling the access cover, make sure the
insulation between the two layers is in tact.
k. With this cover removed, you can vacuum the paddle fan
and the inside of the chamber. Be careful not to bend the
blades on the paddle fan.
i. Release the spring latches and slide the insert body out
onto the hearth or onto the service rail kit, if purchased.
j. Remove the exhaust chamber access cover on the right
rear of the insert.
f. Brush or vacuum the remaining ash from the firebox.
g. Guide the vacuum hose upward into the exhaust passage
in the right rear corner of the firebox.
h. You can now return all pieces inside the firebox and
close the door.
Right & Left Corner
Cleanout Covers
Exhaust Chamber
Access Cover
Insulation