P3 5 i F ireplace Insert
P e l l e t s o r C o r n /P e l l e t M i xt u r e O n l y
S a ve T h e se I n st r u ct i o n s
- 0-775R1 08 1
1
Listing and Code Approvals
pp ance ert ficat n
odel:
P 5i Insert
Laboratory:
O NI-Test Laboratories, Inc.
Report No.
1 5-S-25- .2
Type:
Solid uel Room Heater ireplace
Insert.
Standard(s):
AST E 150 -0 , ULC OR -C
1 82- 1 0, ULC-S 28-
This appliance is also approved for installation in a
shop.
B. Mobile Home Approved
This appliance is approved for Installation in mobile
manufactured homes. The structural integrity of the
mobile home floor, ceiling and walls must be maintained.
The appliance must be properly grounded to the frame of
the mobile home, and must never be installed in a room
designated for sleeping. The unit must have provisions for
an outside air source when installed in a mobile home.
a Spec ficat n
This appliance is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass if needed
D. Electrical R ating
115 AC, 0 Hz,
. Amps (Start-up) avg. 1.5 Amps (Normal Run)
B fic ency Spec ficat n
BTU input will vary, depending on the type of fuel you
use in your stove. oisture and ash content can affect
performance.
Corn is approved for burning only when mixed with wood
pellets.
Hopper Capacity-
#1-70-77 2 5 (2
)
Particulate Emissions
Rating:
BTU Input:
Heating Capacity:
Hopper Capacity-
#1-70-77 1 5 (1
)
uel:
Shipping Weight:
1 lbs.
Wood pellets Corn
28 lbs.
1,500 sq. ft.
0 or ,000 - 5,000 hr
Exempt from EPA per
0 C R, ethod 28A
2 lbs.
