Harman Martin Atomic 3000 LED, Руководство пользователя

Страница: 16 / 44

16 Atomic 3000 LED user manual
Setup
Warning! Read “Safety Information” on page 3 before installing, powering, operating or servicing
the Atomic 3000 LED.
Control panel and menu navigation
The onboard control panel and backlit graphic display on the back of the fixture are used to set the Atomic
3000 LED’s DMX address, configure individual fixture settings, read out data and execute service utilities
.
See “Onboard control menus” on page 32 for a complete list of menus and commands.
Using the control panel
• Press the MENU button A or Enter button C to access the
menus.
• Use the UP and DOWN buttons B to scroll up and down
menus.
• Press the ENTER button C to enter a menu or make a
selection.
• The currently selected item in a menu is indicated by a
star .
• Press the MENU button A to step backwards through the
menus.
Status LED
The LED D next to the control buttons indicates fixture
status:
• GREEN : All parameters normal. Constant green switches
off with the display if you have set the display to go into
sleep mode in the
PERSONALITY menu.
• AMBER : Warning:.
- If ERROR MODE is set to Normal , the warning
message will be shown in the display.
- If ERROR MODE is set to Silent , you can display the error message by setting ERROR MODE to
NORMAL or by opening ERROR LIST in the SERVICE menu.
• RED : Error detected.
- If ERROR MODE is set to Normal , the error message will be shown in the display.
- If ERROR MODE is set to Silent , you can display the error message by setting ERROR MODE to
NORMAL or by opening ERROR LIST in the SERVICE menu.
Besides color, the status LED also gives the following information:
• FLASHING : No DMX signal detected.
• CONSTANT : Valid DMX signal detected (note: constant green only active if display is active).
Display panel
The DMX address is shown in the display panel when the Atomic 3000 LED is powered on and has reset.
The display can be set to go into sleep mode via
PERSONALITY
→
DISPLAY
in the control menu.
Connecting a DMX signal ‘wakes up’ the display.
C
D
A
B
B
Figure 8: Control panel