Harman Martin Atomic 3000 LED, Руководство пользователя

Страница: 3 / 44

Safety Information 3
Safety Information
The following symbols are used to identify important safety information on the product and in this manual:
Warning! Risk Group 3 LED product according to EN 62471. Do not view the light output with optical
instruments or any device that may concentrate the beam.
This lighting fixture is for professional use only - it is not for household use. The fixture must be installed by
a qualified technician. The safety of the installation is the responsibility of the installer. The fixture presents
risks of severe injury or death due to fire hazards, electric shock and falls. Flashing light is also known to
trigger epileptic seizures in persons who are sensitive to it. The fixture can produce powerful, concentrated
light that can create a fire hazard or a risk of eye injury if the safety precautions below are not followed.
If you have any questions about how to install, operate or service the fixture safely, please contact your
Martin™ distributor (see www.martin.com/distributors for details) or call the Martin™ 24-hour service hotline
on +45 8740 0000, or in the USA on 1-888-tech-180.
Respect all locally applicable laws, codes and regulations when installing, operating or servicing the fixture.
Install, operate and service Martin™ products only as directed in their user documentation, or you may
create a safety hazard or cause damage that is not covered by product warranties. Refer any service
operation not described in this manual to an authorized Martin™ service technician. Do not try to carry out
any such operation yourself, as doing so may present a health or safety risk. It may also cause damage or
malfunction and it may void your product warranty.
Before you install, operate or service the Atomic 3000 LED, check the Martin™ website and make sure that
you have the latest user documentation for the fixture. Document revisions are indicated at the bottom of
page 2. The latest versions of the product’s user documentation, including this user manual, are available
for download from the Atomic 3000 LED Product Support page on the Martin™ website at www.martin.com.
Follow the safety precautions listed below and observe all warnings in this manual and printed on the
product. Keep this manual for future use.
P R O T E C T I O N F R O M E L E C T R I C S H O C K
• The Atomic 3000 LED fixture is for indoor use only. Do not expose it to rain or moisture.
• Disconnect the fixture from AC power before carrying out any installation or service work and when the
fixture is not in use.
• Ensure that the fixture is electrically connected to ground (earth).
• Apply AC mains power to the fixture at 100 - 240 VAC nominal, 50/60 Hz only.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
WARNING!
Safety hazard.
Risk of severe
injury or death.
WARNING!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
WARNING!
Fire hazard.
WARNING!
Burn hazard. Hot
surface. Do not
touch.
WARNING!
Powerful light
emission. Risk of
eye injury.
WARNING! Refer
to user manual
for important
safety
information.