Harman Martin Atomic 3000 LED, Руководство пользователя

Страница: 32 / 44

32 Atomic 3000 LED user manual
Onboard control menus
Default settings are indicated in bold print
Menu Item Options Notes
DMX ADDRESS 1
–
XXX
DMX address (default address = 1 ).
XXX
means that the
DMX address range is limited so that the fixture will
always have enough DMX channels within the 512
available.
CONTROL
MODE
3 CHANNEL
Control of Beam strobe frequency, intensity and flash
duration.
4 CHANNEL
Control of Beam strobe frequency, intensity and flash
duration plus access to basic Beam effects.
EXTENDED
Control of Beam strobe frequency, intensity and
flash duration, basic Beam effects, RGB control of
Aura, fixture control/settings, pre-programmed FX.
FIXTURE ID 0
–
9999
User-definable fixture ID number.
PERSONALITY
DIMMER
CURVE
LINEAR
Linear dimming curve
SQUARE LAW
Square law dimming curve
INV SQUARE
LAW
Inverse square law dimming curve
S-CURVE
S-curve dimming curve
STROBE
BEHAVIOR
LED
Solid LED flash
XENON
Flash simulates mains frequency cycles of a Xenon tube
VIDEO
TRACKING
ENABLED
Color fading optimized for speed of changes
DISABLED
Color fading optimized for smoothness
COOLING
MODE
REGULATE FANS
Cooling fan speed thermostatically regulated
CONSTANT FAN
ULOW
Constant fan speed, ultra-low speed
CONSTANT FAN
LOW
Constant fan speed, low speed
CONSTANT FAN
MID
Constant fan speed, medium speed
CONSTANT FAN
HIGH
Constant fan speed, high speed
DMX RESET
OFF
Disable reset via DMX
ON
Enable reset via DMX
DISPLAY
DISPLAY SLEEP
ON / 2 MINUTES / 5 MINUTES / 10 MINUTES
Display remains on constantly / sleeps if no control
buttons pressed for 2, 5 or 10 minutes.
Default =
2 minutes .
DISPLAY
INTENSITY
Display intensity. Default= 100%
DISPLAY
ROTATION
Display rotation
NORMAL / 180°
. Default= NORMAL
DISPLAY
CONTRAST
Display contrast 3% - 100%. Default= 41%
ERROR MODE
NORMAL
Any errors detected are listed in display at 100%
intensity (regardless of
DISPLAY INTENSITY
setting), status LED lights
SILENT
Error messages not shown in display, status LED lights
DEFAULT
SETTINGS
FACTORY
DEFAULT
LOAD
Return all settings (except calibrations) to factory
defaults
NB: can take up to 2 minutes to complete!
CUSTOM 1
LOAD
Load Custom Settings 1 from memory
SAVE
Save current fixture settings as Custom Settings 1
(overwrites existing Custom Settings 1)
CUSTOM 2
LOAD
Load Custom Settings 2 from memory
SAVE
Save current fixture settings as Custom Settings 2
(overwrites existing Custom Settings 2)
CUSTOM 3
LOAD
Load Custom Settings 3 from memory
SAVE
Save current fixture settings as Custom Settings 3
(overwrites existing Custom Settings 3)
Table 6: Control menu