Harman Martin Atomic 3000 LED, Руководство пользователя

Страница: 22 / 44

22 Atomic 3000 LED user manual
FX offset (synchronizing FX across multiple fixtures)
You can set fixtures so that they all start their FX cycle at the same time or you can shift any fixture’s FX
start time so that it displays its FX in sync with another fixture but with a time offset (delayed start).
Consider an FX cycle as consisting of 360° when you send an offset command on the FX sync channel. For
example:
• If you send a 180° offset command, the fixture will start its FX cycle halfway through the cycle of a fixture
that has 0° offset.
• If you set a line of fixtures on a DMX link to offsets of 0°, 10°, 20°, 30° etc. on the FX sync channel, you
will create an FX chase down the line of fixtures.
Beam color with the Atomic Colors scroller
To obtain colored strobe light from the Beam array, install the Martin™ Atomic Colors scroller unit on the
fixture (see “Atomic Colors scroller” on page 13).
Beam blackout after loss of data signal
To avoid possible difficulties stopping a strobe if data communication with the Atomic 3000 LED is
interrupted while the strobe is running, Beam output shuts down after 2 seconds if the DMX signal is lost.
RDM
RDM (Remote Device Management) is implemented in the Atomic 3000 LED, and RDM communication is
therefore possible over the DMX data link. As provided for in the ANSI/ESTA E1.20 RDM protocol, the
fixture can send information about its RDM-accessible parameters to an RDM control device.