Wall-plate Transmitter Panel Description (UA Version)
Reference Manual - JPK-1300
9
No. Name
Description
1
POWER LED
(Green)
On:
JPK-1300 TX is powered on.
Off:
JPK-1300 TX is powered off or in standby.
2
LINK LED
(Green)
LED indicates the connection status of the TX and RX. On:
JPK-
1300 TX and RX are linked.
Blinking:
Link error.
Off:
No link.
3
HDCP LED
(Green)
On:
Signal is being transmitted with HDCP.
Off:
Signal is being transmitted without HDCP or no signal is being transmitted.
4
HDMI 1 LED
(Green)
On:
The HDMI IN 1 port is selected as the signal input channel.
Off:
The HDMI IN 1 port is not selected as the signal input channel.
5
HDMI 2 LED
(Green)
On:
The HDMI IN 2 port is selected as the signal input channel.
Off:
The HDMI IN 2 port is not selected as the signal input channel.
6
USB-C LED
(Green)
On:
The USB-C port is selected as the signal input channel.
Off:
The USB-C port is not selected as the signal input channel.
7
USB-C IN Port
USB-C signal input port. Connect to the USB-C source device (such as PC) with USB-C cable.
8
HDMI IN 1/2
Port
HDMI signal input port. Connect to the HDMI source device (such as DVD player or PC) with HDMI
cable.
9
USB HOST
Connect to the PC or Notebook with USB cable.
10
SOURCE
Button
Press this button to circularly select the signal input channel, and the corresponding HDMI 1/HDMI 2/ USB-
C LED will be on.
11
IR Window
Used for IR pass-through or IR learning.
12
AV LINK Port
HDBaseT output port. Connect to the AV LINK port of RX with Cat 6/6A/7 cable.
13
CONTROL Port
Connect to the CONTROL port of Keypad with Cat 6/6A/7 cable.
14
MICRO USB
Port
Used for Software upgrade.
