Harman AMX JPK-1300, Справочник по аппаратуре

Страница: 51 / 55

Control Commands (Direct Control)
Reference Manual - JPK-1300 51
No. Command Function Description Example
28
set relay disp off
delay:<time>
Variables:
<time>= 0 ~ 300 s
Default Value:
30 s
Set relay control display off
delay time
Command:
set relay disp off delay:60
Return :
set relay control display off delay 60s
29
set relay disp
manual:<state>
Variables:
<state>= on | off
set relay control display manual
on/off
Command:
set relay disp manual:on
Return :
set relay control display manual on
30
get vidout cec power
Variables:
<state>=
{
on,
off,
varmup,
cooldown
}
Get current power status from
the sink via CEC
Command:
get vidout cec power
Possible response message include:
▪ get cec on for sink on output
▪
get cec fail for sink on output
▪ No attached sink
31
set vidout cec power
Variables:
<state>=
{
on,
off
}
Set power status on/off for the
sink device via CEC
Command:
set vidout cec power:on
Possible response message include:
▪ set cec on for sink on output
▪ No attached sink
32 set vidout cec standby
Set power standby for the sink
device via CEC
Command:
set vidout cec standby
Possible response message include:
▪ set power standby for sink on output
▪ No attached sink
33 set vidout cec makeactive
Make active for the sink device
via CEC
Command:
set vidout cec makeactive
Possible response message include:
▪ make active for sink on output
▪ No attached sink
34
get vidout cec sleep
timeout
Variables:
<time>= 0 ~ 60 s
Default Value:
0 s
Get cec control display off delay
time
Command:
get vidout cec sleep timeout
Return :
get cec sleep timeout 30s
35
set vidout cec sleep
timeout:<time>
Variables:
<time>= 0 ~ 60 s
Default Value:
0 s
Set cec control display off delay
time
Command:
set vidout cec sleep timeout:60
Return :
set cec sleep timeout 60s
36
set vidout cec disp
manual:<state>
Variables:
<state>= on | off
Set cec control display manual
on/off
Command:
set vidout cec disp manual:on
Return :
set vidout cec control display manual on
37
get display
Variables:
<state>= on | off
get the last time control state of
display on/off
Command:
set disp manual:on
Return :
get display manual on