Control Commands (Direct Control)
Reference Manual - JPK-1300
47
No. Command
Function Description
Example
5
get serial disp off cmd
Get serial control display off
commands
Command:
get serial disp off cmd
Return
:
get serial display control off command:POWER OFF,
delay 100ms, none
6
set serial disp off
cmd:<cmd1>,<delay_
time>,<cmd2>
Variables:
<cmd1>=
{
none (for clear saved
command)
ascii or hex command
string
}
<delay_time>= 0 ~ 2000 ms
<cmd2>=
{
none (for clear saved
command)
ascii or hex command
string
}
Default Value:
cmd1 = none
delay_time = 100
cmd2= none
Set serial control display off
commands
Command:
set serial disp off cmd:33 44 AA BB,1000,55 66 CC DD
Return
:
set serial display control off command:33 44 AA
BB,delay 1000ms,55 66 CC DD
7
get serial disp off delay
Variables:
<time>= 0 ~ 60 s
Default Value:
0 s
Get serial control display off
delay time
Command:
get serial disp off delay
Return
:
get serial control display off delay 30s
8
set serial disp off
delay:<time>
Variables:
<time>= 0 ~ 60 s
Default Value:
0 s
Set serial control display off
delay time
Command:
set serial disp off delay:60
Return
:
set serial control display off delay 60s
9
set serial disp
manual:<state>
Variables:
<state>= on | off
Set serial control display manual
on or off
Command:
set serial disp manual:on
Return
:
set serial control display manual on
10
send serial cmd:<cmd>
Variables:
<cmd>= ascii or hex
command string
Send serial command out over serial
port
NOTE: the sent out command string
will not be saved in device
Command:
send serial cmd:Standby
Return
:
sent serial command:Standby
