Hardi ZENIT 400, Оригинальная инструкция

Страница: 43 / 118

39
4 - Starting up
Electrical connections
General information
If your equipment includes an electrical component, please note the
following information to correctly connect the equipment and to
prevent problems when working.
The voltage required by the electrical components is 12 V. Before
connecting any component, make sure that the polarity is correct.
Red wire = 12 V (+ positive)
Black wire = (- negative)
The connectors assembled on the electric components comply with
the standards for the majority of modern tractors. If your tractor has
another type of power supply connector, the supplied connector will
need to be removed and adapted to the tractor connector.
Electrical operating units
Find a place in the tractor’s cab where it is possible to fit the control
box so you can operate it as comfortable as possible. The most
recommended place is to the right of the driver’s seat.
The control box must be properly attached to prevent it from being hit
or from excessive vibrations.
The connector type is universal and it should be able to be connected
to any tractor. Do not hock into coincidently wires in tractor cabin, as it
will not secure stable power and current.
Minimum requirement: min 11V max 13 V
Amp. Per SV section 2.5
Amp. Per CB section 0.75
As an emergency solution, remove the connector and splice the wires
directly to the battery, remember to have fuse in-between.
The control box must be properly attached to prevent it from
being hit or excessive vibrations.
The connector type is universal and it should be able to be connected
to any tractor.
As an emergency solution, remove the connector and splice the wires
directly to the battery.
WARNING! Always remember: Red wire (+) Black wire (-)
DANGER! Always turn off any spray computer before you
unplug the power supply and cable to the sprayer.
Data transmission must stop, before power supply is stopped.
A
B
12 V
Connection
to sprayer
12 V
+
Brown
-
Blue