Hardi Mercury Series, Инструкция

Страница: 49 / 114

49
4 - Sprayer setup
General information
Unloading the mistblower from the truck
When unloading the mistblower from a van or truck with the aid of a
hoist or crane, use the lifting points shown in the illustration, and
make sure that the straps or cords used for the purpose are strong
enough.
€
DANGER! Do not stand underneath or beside the machine
when it is being loaded or unloaded.
Before starting up for the first time
Although the metal parts of the mistblower have received a strong protective surface treatment, a film of anti-corrosion oil
(e.g. CASTROL RUSTILLO or SHELL ENSIS FLUID) should be applied to all metal parts to prevent the enamel from being
discoloured by the chemical products; it will also make it easier to clean the mistblower.
μ
ATTENTION! This treatment should be repeated whenever the protective film wears off.
Counterweights
Check whether a counterweight is required on the front of the tractor when coupled to the machinery to prevent excessive
rocking or an accident from occurring.