Hardi Mercury Covamax series, Инструкция оператора

Страница: 106 / 110

10 - Risk Assessment
10. 4
Pressure
Slips, Trips & Falls
RISK ITEM RISK ASSESSMENT CONTROL MEASURE
#
• Can anyone come in
contact with fluids/gases
under high pressure due
to plant failure or misuse
of the plant? •
Yes
– If pressure hoses burst
due to damage or improper
fittings
• Operator to inspect (before
start-up) all hoses for
damage and improper
fittings and take corrective
action where necessary
RISK ITEM RISK ASSESSMENT CONTROL MEASURE
#
• Can anyone using the
plant or in the vicinity of
the plant, slip, trip or fall
due to:
A
• Un-even or slippery work
surface •
Yes
– Depending on the
ground surface
and the task
to be performed. Slope
angle, slippery surface will
affect safety
• Use handrails provided.
• Operator to perform risk
assessment of task and
conditions
B
• Poor housekeeping, e.g.
spillage not cleared, build
up of waste
• Yes • Operator to maintain a safe
work area.
C
• Obstacles being placed in
the vicinity of plant
No
D
• Other factors not
mentioned
No
E
• Lack of proper work
platform •
Yes
– If the platform is dirty or
slippery
due to mud or water
and if the handrails are
missing or damaged
•
Keep work platform clean all
times and
make sure hand-
rails and ladder are in good
condition
F
• Lack of proper stairs or
ladders • Yes • Make sure ladder is
maintained in good
condition
G
• Lack of guard rails or other
suitable edge protection • Yes • M ake sure hand-rails and
ladder are in place and in
good condition
H
• Steep walking surfaces No
I
• Collapse of supporting
structure
No
J
• Other factors not
mentioned
No