Hardi Mercury Covamax series, Инструкция оператора

Страница: 24 / 110

3 - Description
1. 6
Drawbars
Standard Duty Wide Angle Drawbar
The standard drawbar is coupled to the tractor’s hitching point.
Before connecting the PTO make sure that the drawbar is properly
secured and check that the tractor’s wheels do not touch the
mistblower when turning. The length of the drawbar is adjustable
(see Sprayer Setup section for “Changing the drawbar length”).
μ
Attention: Before connecting the PTO make sure that the
diameter and number of splines on the driveshaft is the
same as that of the tractor’s output shaft. Make sure that the
tractor’s PTO output speed is matched to the speed of the
product pump.
Heavy Duty Wide Angle Drawbar
This drawbar is coupled to the tractor’s linkage.
Check that the tractor’s wheels do not touch the mistblower when
turning. Unlike a standard drawbar, it permits greater turning
angles, but a transmission shaft with CV joint is needed on the
mistblower side.
The length of the drawbar is adjustable (see Sprayer Setup section
for “Changing the drawbar length”).