9 - Warranty
9. 1
Warranty policy & conditions
HARDI® Australia P/L hereinafter called “HARDI®”, offers the following limited warranty in accordance with the
provisions below to each original retail purchaser of HARDI® new equipment of its own manufacturer, from an
authorized HARDI® dealer, that such equipment is at the time of delivery to such purchaser, free from defects in
material and workmanship and that such equipment will be warranted for a period of 12 months from the date of
delivery to the end user providing the machine is used and serviced in accordance with the recommendations in
the Operator’s Manual and is operated under normal farm conditions. Use of these products for contracting
purposes will limit the warranty to a period of 90 days.
•
This limited warranty is subject to the following exceptions:
•
Parts of the machine not manufactured by HARDI®, (i.e. engines, tyres, tubes, electronic controls, and other
components or trade accessories, etc.) are not covered by this warranty but are subject to the warranty of the
original manufacturer. Any claim falling into this category will be taken up with the manufacturer concerned.
•
This warranty will be withdrawn if any equipment has been used for purposes other than for which it was
intended or if it has been misused, neglected, modified or damaged by accident or ‘act of God’, let out on hire
or furnished by a rental agency. Nor can claims be accepted if parts other than those manufactured by HARDI®
have been incorporated in any of our equipment. Further, HARDI® shall not be responsible for damage in
transit or handling by any common carrier and under no circumstances within or without the warranty period
will HARDI® be liable for damages of loss of use, or damages resulting from delay, or any other consequential
damage including loss of profit.
•
We cannot be held responsible for loss of livestock, loss of crops, loss because of delays in harvesting or any
expense or loss incurred for labour, supplies, substitute machinery, rental for any other reason, or for injuries
either to the owner or to a third party, nor can we be called upon to be responsible for labour charges, other
than originally agreed, incurred in the removal or replacement of components.
•
The customer will be responsible for and bear the costs of:
•
Normal maintenance such as greasing, maintenance of oil levels, minor adjustments, etc.
•
Decontamination and Transportation of any HARDI® product to and from where the warranty work is
performed. Failure to properly clean/decontaminate the unit clear of ALL chemical traces prior to delivery for
maintenance, may incur additional servicing fees at the discretion of HARDI®.
•
Dealer travel time to and from the machine or to deliver and return the machine from the service workshop
for repair.
•
Dealer travelling costs.
•
This warranty is limited to the replacement, free of cost to the original purchaser, of any part/parts of the unit
that in HARDI’s judgement, show evidence of defects in material and/or workmanship, provided the said part/
parts is/are returned to HARDI®, FREIGHT PRE PAID through an authorised HARDI® dealer. Parts defined as fast
wearing items, i.e. tyres, diaphragms and V-belts, etc (which could be subject to mis-use or abuse from high
solvent content chemicals, lack of cleaning, etc) is at the discretion of HARDI® AUSTRALIA P/L.
•
This warranty will not apply to any product which is altered or modified without the express written
permission of HARDI® and/or repaired by anyone other than an Authorized Service Dealer
•
Warranty is dependent upon the strict observance by the purchaser of the following provisions:
•
That this warranty may not be assigned or transferred to anyone.
•
That the Warranty Registration Certificate has been correctly completed by dealer and purchaser with their
names and addresses, dated, signed and returned to the appropriate address as given on the Warranty
Registration Certificate.
•
That unit has been operated in accordance with the Operators Manual/s, and that all safety, maintenance and
cleaning instructions in the operator’s manual shall be followed and all safety guards regularly inspected and
replaced where necessary.
•
No warranty is given on second-hand products and none is to be implied
•
HARDI® reserves the right to incorporate any change in design in its products without obligation to make such
changes on units previously manufactured.
•
The judgement of HARDI® in all cases of claims under this warranty shall be final and conclusive and the
purchaser agrees to accept its decisions on all questions as to defect and to the exchange of any part or parts.
Содержание Mercury Covamax series
