Hardi Mercury Covamax series, Инструкция оператора

Страница: 53 / 110

4 - Set Up
4. 13
Boom Adjustments
Boom Width - Row Spacing
The position of the out reaching arms can be regulated to alter
the width of the boom, in order to adapt the machine to match
the row spacing. Adjustment is achieved by loosening clamps
on the horizontal bar and extending or shortening the
telescopic tubes to the desired width. Once the required
position has been chosen retighten clamps to prevent any
movement of the bar.
÷
Note: Both the inner and outer boom sections may be repositioned to suit user requirements.
Crop Height Adjust
As with the adjustment it is also possible to adjust the crop height.
Vertical delivery tubes are clamped to the vertical boom member.
By loosening the clamps the whole tube assembly can be
repositioned higher or lower to suit current crop heights.
÷
Note: Both the inner and outer boom sections tube lengths
may be altered to suit user requirements.
Boom Width Adjustment
Crop Height Adjustment