37
- Additional segments are generated when empty space is pressed.
- To insert/delete segments, press segment number, it activates the segment and allows insert/delete.
- Press [T/S] button to display time signal setting in detail for each segment.
- Press WAIT box for each segment to activate/deactivate the standby.
- Press T/S box for each segment to enter the time signal setup screen for the
corresponding segment.
- The operation mode of the time signal is divided to 'segment ON/OFF mode' and the
'time operated mode'. Total of 8 time signals can be set.
- Start Mode : SSM (start set value),
PV1 (Start the directed value, take priority on the slope level),
PV2 (Start the directed value, take priority on time)
- Start SV : Setup value when starting in PV1 or SSV
- Exit Mode : RST (when program is terminated, stop running),
HOLD (when program is terminated, switch to 'hold' status automatically).
- Exit Segment : Segment number that will operate at last.
(if 0, operate until the end of the segment of the corresponding pattern).
5.3.2 Start/Exit Setup
هﺮﮐ
ﮓﻧﺎﯿﻧﺎﻫ
تﻻﻮﺼﺤﻣ
یرﺎﺼﺤﻧا
هﺪﻨﯾﺎﻧﻤ
ناﻮﯿﺳ
ﺖﮐﴍ
021-33989001
www.sivancarno.com
021-33989002
