7
-
68
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Spider
EN
Voercomputer—Feeding computer—Fütterungscomputer—ordinateur d
’
alimentation
Index
2.3.1 General Safety
•
Read and understand the manual and all safety signs before you connect power supplies to operate or adjust
Spider.
•
Only trained persons are permitted to operate the Spider. A first
-
aid kit must be available near the Spider.
Store in a highly visible place.
•
Install all protective covers and guards before you operate the Spider.
•
Wear the correct protective clothing and equipment.
•
Disconnect and isolate the electrical power supply before you clean or do maintenance on the Spider.
•
Know the emergency medical centre number for your area.
•
Contact your nearest milking equipment dealer provider if you have any questions.
•
Review safety related items with all operators frequently (annually).
2.3.2 Electrical Safety
•
Only an authorized electrician must install the electrical power supply for the Spider.
•
Maker sure the electrical grounding of the electrical system and all parts of the Spider meet the local rules and
regulations.
•
Replace any damaged electrical lines, conduits, switches and components immediately.
•
Isolate the electrical power supply before you open the Spider enclosure to work on the electrical system.
2.3.3 Installation Safety
•
Read and understand the instructions in this manuel.
•
Make sure the Spider is correctly installed.
2.3.4 Operating Safety
•
Read and understand the applicable manuel and all safety signs before you connect power supplies to operate
or adjust the Spider.
•
Only trained persons are permitted to operate the Spider.
•
Switch off the electrical power supply by taking plug out of the power point and secure the plug before you
clean or do maintenance on the Spider.
•
Install the covers and guards before you operate the Spider.
•
Keep hands, feet, hair and clothing away from all the electrical parts.
•
Keep unauthorized persons, especially small children away from the Spider at all times.
•
Before the electrical supply is attached to the Spider, make sure all parts are tight and that all the parts are in
good condition.
•
Contact your nearest milking equipment dealer if you have any questions.
