Page EN-16
Cooking zones/mixed zones and sensors
The heat setting display will return to the
originally selected heat setting display after
approx. 5 minutes.
3. In order to deactivate the booster function
early, touch the sensor for the cooking
zone/mixed zone for which you wish to
deactivate the booster function.
4. Touch the boost sensor (13).
“
b
” will disappear from the heat setting
display next to the selected cooking zone/
mixed zone and the original heat setting
will once more be displayed.
Switching off individual
cooking zones/mixed zones
1. Touch the sensor of the cooking zone/
mixed zone that you would like to switch
off.
2. Touch the slider sensor (14) at the left
end or swipe your finger left over the slid-
er sensor until the heat setting display “
0
”
appears.
After a few seconds the heat setting dis-
play changes to “
H
” or “– –”.
CAUTION
Risk of burns!
■
Always switch off a cooking zone/
mixed zone using the sensors only;
never by removing the cookware from
the cooking zone/mixed zone. Other-
wise, the cooking zone/mixed zone
will be reactivated as soon as a pot or
other object made of ferromagnetic
metal is placed on top.
■
Do not place objects on
cooking zones/mixed zones that are
not switched off. There is a risk that
the cooking zone/mixed zone could
be activated and the object heated.
Automatic protection settings
The hob has a range of protection settings
that warn of danger and protect the appliance
from damage.
Residual heat display
During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
zone/mixed zone becomes hot. If you switch
off the cooking zone/mixed zone or the entire
hob, the residual heat symbol “
H
“ appears in
the heat setting display of a cooking zone/
mixed zone that is still hot.
If the temperature of the cooking zone/mixed
zone falls below a specific value, the residual
heat symbol “
H
” disappears.
Automatic reduction in performance
The temperature of the electronic elements
inside the hob are constantly monitored. If the
heat increases too much, the hob is automat-
ically switched off.
Switching the hob off
--
-
-
-
H
-
(11)
• To switch the entire hob off, touch the on/
off sensor (11).
An acoustic signal will sound. All light dis-
plays, including the flashing residual heat
symbols ‘
H
’ will go out.
