Hanna Instruments HI98190 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 60

background image

11

OPERA

TIONAL GUIDE

•   pH reading with the selected resolution.
•  Temperature reading in the selected unit (°C or °F).
•   Temperature compensation mode (MTC ‑ manual, ATC ‑ automatic). While in MTC mode the
  indicate that the temperature can be manually changed using / keys.
•   Electrode condition during the calibration day.
•   The buffers used in last pH calibration (if feature is enabled in

SETUP

).

• Battery level indicator.
• Available functional keys in accordance with the model.
In order to take more accurate pH measurements, make sure that the instrument is calibrated
(see page 14 for calibration details).
It is recommended that the electrode is always kept moist and rinsed thoroughly with the sample to
be measured before use.
The pH reading is directly affected by temperature. For accurate pH measurements, temperature
must be taken into consideration. If the sample temperature is different from the temperature at
which the pH electrode was kept, allow a few minutes to reach thermal equilibrium.
To use the instrument's Automatic Temperature Compensation (ATC) feature, submerge the
temperature probe into the sample as close to the electrode as possible and wait for a few seconds.

If manual temperature compensation (MTC) is desired, the temperature probe must be
disconnected from the instrument (

HI98191

only).

The display will show the default temperature of 25 °C, the last measured temperature reading, or
the last set temperature, with the

“MTC”

indication.

The

“MTC”

indication and the symbol light up on the LCD to indicate that the instrument is in MTC

mode and the / keys can be used to enter the desired temperature value.

Note: When in MTC the user can press and hold the / keys, and the instrument will

start incrementing /decrementing the temperature value. The instrument keeps measuring

and the display is updated periodically.

On the pH screen are displayed:

«
...
9
10
11
12
13
...
»

Содержание HI98190





























































Отзывы:

Нет отзывов

Похожие инструкции для HI98190

Бренд: OfiTE Страницы: 24

TEC SourceMeter 2510

Бренд: Keithley Страницы: 244

Бренд: Kawai Страницы: 112

Бренд: Mahr Страницы: 384

Бренд: Veeder-Root Страницы: 39

Бренд: Veeder-Root Страницы: 98

Бренд: VECTECH Страницы: 9

Бренд: DGH Страницы: 87

Бренд: GMC-I Prosys Страницы: 10

Бренд: S&S Northern Страницы: 5

Бренд: SEAWARD Electronic Страницы: 57

Бренд: HANLA Страницы: 12

Бренд: Veeder-Root Страницы: 12

Бренд: odoland Страницы: 6

Бренд: AEMC Страницы: 16

Бренд: Solight Страницы: 2

Бренд: Apera Страницы: 2

FTCI-3/4D15A4P-2LUX-H1141

Бренд: turck Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды