Hanna Instruments HI98190 Скачать руководство пользователя страница 44

Страница: 44 / 60

LOGGING

This feature allows the user to log pH, Rel mV or ISE measurements. All logged data can be
transferred to a PC through the

USB

port using

HI92000

application.

The maximum logging space is 300 for

HI98191

and 200 for

HI98190

record locations (100

records on each range).

LOGGING THE CURRENT DATA

To store the current reading into memory, press

LOG

while in measurement mode.

The instrument will display for few seconds the record number and the amount of the free log
space.
If the LOG space is full, the

“Log space is full”

message will be displayed for few seconds when

Log key is invoked. Enter View Logged Data Mode and delete records in order to free log space.

VIEW LOGGED DATA

Press

RCL

to retrieve the information stored while in measurement mode for the specific range.

The list of records is displayed.
If no data were logged, the instrument will display

“No Records”

message.

Use / keys to scroll between the records from the list.
Press

Delete All

to enter Delete All screen.

Press

Delete

to enter Delete records screen.

Press

to view more information of the focused record.

Содержание HI98190





























































Результаты поиска

Содержание HI98190

Отзывы:

Похожие инструкции для HI98190

Бренды по названию

Популярные бренды

Hanna Instruments HI98190, Инструкция по эксплуатации

Результаты поиска

Содержание HI98190

Отзывы:

Похожие инструкции для HI98190

Бренды по названию

Популярные бренды