82
MENU
Controller Password
Option:
00000 to 99999
With Controller Password selected, press
Modify,
for the password input screen. Press the key to
increment the digit (displayed flashing) and the key to decrement. Press
CFM,
to save. To navigate
right between digits, press the key.
Controller password protects against unauthorized changes.
It is required if modifications are
made. After the password has been enabled, parameter modifications or probe calibration data are
password protected. Entering the password will unlock the controller . When in measurement mode,
the controller is automatically locked again after 10 seconds -> . For further details, see Enabling
& Disabling the Password section.
Enabling & Disabling the Password
For enabling the password please follow the steps:
1. From Main Menu, press the or key to navigate to General setup, Controller password.
2. With Controller Password menu item selected, press
Modify.
3. Press the
keys to modify the flashing digit, press the to move places, repeat. Then
press
CFM,
to confirm choice.
4. Re-key the password and press
CFM
, to save the password.
