22
INST
ALLA
TION
To wall mount the controller:
1. Select the position desired for the controller and following the dimensions indicated in
Figure 6,
drill the holes required for attaching the wall-mount panel to the surface. The drill size depends
on the fasteners dimension required by wall type and thickness.
2. Fasten the wall-mount panel to the controller following
Figure 8
schematic, and using supplied
screws and washers.
3. Fasten the mounting panel to the wall (surface), using four bolts.
4. For horizontal wall mount, use a leveling tool to adjust the controller in correct horizontal
position.
7.3. PANEL MOUNT
Inside Depth, Width & Height Dimensions
• 122 mm (4.80”) minimum inside depth i.e. the dimension it extends behind the panel
• 138 mm (5.4 “) width x 138 mm (5.4 “) height
• panel thickness can go up to 10 mm (0.39 “), depending on material
11mm 0.433”
38mm 1.5”
160mm 6.3”
Figure 9:
Panel Mount, Inside Depth
