Hanna Instruments HI510 Скачать руководство пользователя страница 72

Страница: 72 / 140

MENU

• To view additional information about the selected data point, press

Details

• Press virtual key

Option

to Export or Delete logs.

Log Data Export to USB-C Flash Drive

To export logged data to a USB-C flash drive:
• Insert a USB-C flash drive (or USB-A with cable adapter) into the controller USB-C connector,

located on the side.

• Press the

keys to move between the options.

• With the USB-C flash drive plugged in, press

CFM

, to save an action or the key to return to the

menu without saving.

• The exported logs will be in a folder named HI510-xxxx (where x are the controller ID)

Note:

Do not remove the USB flash drive during the file transfer.

If an error occurs during transfer, the “Error while transferring” message is displayed. Reinstall the
flash drive and try again.

Data Management

Press

Options

to:

Export selected log file
Export all log files
Delete all logged files data

To scroll the options, press the

keys.

Содержание HI510













































































































































Результаты поиска

Содержание HI510

Отзывы:

Бренды по названию

Популярные бренды

Hanna Instruments HI510, Инструкция по эксплуатации

Результаты поиска

Содержание HI510

Отзывы:

Бренды по названию

Популярные бренды