Hanna Instruments HI510 Скачать руководство пользователя страница 48

Страница: 48 / 140

MENU

Value

This parameter defines the Set point value. With Value selected, press

Set

. Press the

keys to

edit the required value within minimum / maximum probe limits (e.g. 0.00 to 12.00 pH), displayed
blinking. Press

CFM

, to save.

Mode

Option:

ON/OFF, Proportional, PID

The Mode parameter defines the type of control the controller will use: ON/OFF, Proportional or PID.
The

Setup

virtual key is used after selecting

Mode

, to set additional settings. See SECTION 14 for

detailed information on Control Modes & Algorithms.

Navigation

• To open the drop-down list for Mode, press

Modify

• Press the

keys to select mode type: ON/OFF, Proportional or PID.

• Press

Select,

to save.

• After selecting

Mode

, press

Setup

Setup for ON/OFF control

• For the drop-down list to be displayed, press

Setup

• Press the

keys to move between Mode

and

Hysteresis.

• Select Mode and press the virtual keys to choose ON/OFF Low or ON/OFF High.
• Press the key, to select Hysteresis.
• With Hysteresis (default value 1.00 pH) highlighted, press

Set.

The present value will blink

permitting editing, within minimum 0.02 pH and maximum 1.80 pH, using the

keys.

• Press

CFM,

to save.

• Press the key, to exit Setup.

Содержание HI510













































































































































Результаты поиска

Содержание HI510

Отзывы:

Бренды по названию

Популярные бренды

Hanna Instruments HI510, Инструкция по эксплуатации

Результаты поиска

Содержание HI510

Отзывы:

Бренды по названию

Популярные бренды