handi quilter Infinity 26 страница 15 Скачать руководство пользователя

Страница: 15 / 90

1 4 |

www.HandiQuilter.com

To disconnect the power cord

• Press the red button on the end of the cord that connects to the machine; then pull out the cord.

For more information, see Power Switch i n t h e Using Your Machine section of this manual.

NOTE: Make sure that the machine is off before plugging into power source. The rear power switch

should be in the 0, or off, position.

Handlebars

The Infinity has handlebars at both the front and back of the machine. You’ll use the back handlebars for

pantographs and Groovy, or pattern, boards, and will use the front handlebars for most other quilting

activities.

For more information about using the touch-screen displays, see Using the Touch-Screen Displays l a t e r i n

this section of the manual.

CAUTION: To prevent any electrical damage to the handlebars, always turn off all power to the

machine when connecting or disconnecting the handlebars.

To install the front handlebars

ONLINE: For more information about installing the front handlebars, watch the video Installing the

Front Handlebars at: http://www.handiquilter.com/videos/hq-infinity/210/.

1 . Locate the three hex screws for the front handlebars (two 4mm hex screws and one 5mm hex screw)

and both the 4mm and the 5mm hex wrenches.

IMPORTANT: A handlebar bolt is also

provided for you to use instead of the 5mm

hex screw. This enables you to easily hand-

loosen the bottom screw to adjust the angle

of the handlebars to switch between micro

quilting and regular quilting.

NOTE: If you choose to use the lever bolt,

you will lose approximately three-fourths

of an inch of quilting space near the

take-up pole.

Содержание Infinity 26



























































































Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды

handi quilter Infinity 26, Руководство пользователя

Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды