handi quilter Infinity 26 страница 37 Скачать руководство пользователя

Страница: 37 / 90

36 |

www.HandiQuilter.com

Quilting With the Infinity

Preparing to Quilt

1 . Make sure your machine has been cleaned, oiled, has a new needle, and that the tracks on the frame

are free from threads or other debris. If the machine isn’t already plugged in, plug it in now.

2 . Select your thread and wind one or more bobbins.

3. Turn on the main power switch at the back of the machine and then use the front power button on the

left side of the machine to turn the machine on or off as needed.

4 . Set your bobbin tension and thread your machine.

5 . After loading your quilt, use a scrap of fabric along the edge of the quilt backing and batting to test your

top tension. Make adjustments to the top tension as needed.

To load the quilt

ONLINE: To see how to load the quilt onto the frame, watch the video Loading a quilt at:

http://www.handiquilter.com/videos/hq-infinity/247/.

To bring bobbin thread to the top of the quilt

ONLINE: To see how to bring the bobbin thread to the top of the quilt, watch the video

Starting and Stopping Quilting at: http://www.handiquilter.com/videos/hq-infinity/229/.

1 . After the machine is threaded, locate needle up/needle down button on

the handlebar. Move the machine over the quilt to your starting location.

2 . While firmly holding the tail of the needle thread, press the needle up/

down button twice, causing the needle to go down through the quilt

sandwich and then back to the up position.

3. Move the machine two to three inches while holding the needle thread in place. The bobbin thread

will pull up through to the top of the quilt.

4 . Grasp the bobbin thread loop and pull it to the desired length. Reposition the needle to the starting

location, tie off the threads by quilting a few stitches in place (or press the Tieoff button on the Main

screen), and begin quilting.

NOTE: If you have customized either the star or diamond button to do a tieoff, press that button

on the handlebar instead. For more information about configuring the handlebar buttons, see To

customize the handlebar buttons i n t h e Machine Settings section of this manual.

Содержание Infinity 26



























































































Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды

handi quilter Infinity 26, Руководство пользователя

Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды