handi quilter Infinity 26 страница 44 Скачать руководство пользователя

Страница: 44 / 90

HQ Infi nity User Manual

| 43

Reset-bobbin butt on: Press this butt on aft er a bobbin change if you are using

the low-bobbin alarm. This resets the low-bobbin reading to indicate you are

using a full bobbin. the number on this butt on shows an esti mate of how much

thread remains on the bobbin. This number updates as you quilt. As the number

gets closer to zero, the bobbin is running out of thread. For more informati on

about the low-bobbin setti ngs, see To set the low-bobbin thresholds i n t h e

Toolbar Opti ons secti on of this manual.

IMPORTANT: Touch this butt on only to reset the bobbin capacity to

indicate a full bobbin. If you want to open the Low Bobbin Alarm screen,

s e l e c t t h e Machine Setti ngs toolbar butt on and then select the Low

Bobbin Alarm s c r e e n .

To use the on-screen hand wheel

The on-screen hand wheel enables you to rotate the hand wheel from the Main

screen rather than reaching around the machine to do it manually.

Drag your fi nger down from the top of the onscreen hand wheel (in the directi on

of the arrows) to cycle the needle bar and the presser bar.

NOTE: You can, if necessary, move your fi nger in an upward moti on to

turn the hand wheel in the opposite directi on. You’ll typically do this only

when you need to break a thread lock.

Sti tching Modes

The Infi nity enables you to choose between two modes of sti tch regulati on (Cruise or Precision) or to

choose manual sti tching. It also includes a basti ng mode.

Manual Sti tching Mode

When using the manual sti tching mode, the length of the sti tch is determined by how quickly or slowly you

move the machine around the quilt, in combinati on with the number of sti tches per minute (up to 3100)

you have selected. For a consistent sti tch length, you will need to move the machine at a consistent speed.

Experiment with diff erent combinati ons of quilti ng speed and sti tches per minute to fi nd what opti mally

works for you.

To use manual sti tching mode

ONLINE: For informati on about using manual sti tching mode, watch the video Using Manual

Sti tching Mode at: htt p://www.handiquilter.com/videos/hq-infi nity/234/.

Содержание Infinity 26



























































































Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды

handi quilter Infinity 26, Руководство пользователя

Результаты поиска

Содержание Infinity 26

Отзывы:

Похожие инструкции для Infinity 26

Бренды по названию

Популярные бренды