Hamworthy UF100-1, Инструкция по установке, вводу в эксплуатацию и эксплуатации

Страница: 19 / 64

HAMWORTHY HEATING LTD
13
UPTON FLOOR STANDING SERIES 500001340/C
4.0 SITE LOCATION AND PREPARATION
4.1 Site Location.
•
In the event that the boiler cannot be moved on a pallet truck, the four M8 bolts retaining the top cover can be
replaced with M8 lifting eyes and using suitable lifting slings hoisted into position.
IMPORTANT: lifting of single modules only is permitted by using the M8 lifting eye fixing positions provided.
DO NOT LIFT THE BOILER BY THE CASING PANELS!
•
The floor or plinth for the boilers and pipe work kit must be both flat and level to ensure correct alignment of fittings
and connections.
•
The floor or plinth must be sufficiently strong to support the weight of both the boilers and pipe work kit where used.
•
The floor or plinth must be fireproof in accordance with BS 6644.
•
The plant room must have sufficient space for installation of boilers, pipe work, pumps controls, flues ventilation,
access and servicing and other items of plant.
Figure 4.2 - Gas Connection Point
Gas connection
M8 Lifting eye fixing positions.
Boiler Model UF100/150 UF200/250 UF300/350 UF300/350
Stack size 3 high 2 high 3 high 2 high 3 high 2 high 3 high 2 high
Number of modules 12 12 6 12
Maximum output @ 20°C Δ T MW 1.8 3.0 2.0 4.0
Maximum pressure bar 6
Minimum pressure bar 1.0 1.2 1.5 1.5
Maximum flow rate Kg/s 21.5 35.8 25.1 50.2
Weights
Flow and return manifold kit kg 207 156 282 212 317 235 351 270
Low loss header and pipe work kg 131 124 336 325 336 325 438 416
Secondary circuit manifold kit kg 59 106 106 158
Blanking flanges kit kg 15 28 28 43
Water content
Flow and return manifold l 36 27 65 50 65 50 87 73
Low loss header and pipe work l 40 34 100 88 100 88 169 148
Figure 3.3 - Pipe Kit Data