background image

6

If your ceiling fan does not have an existing UL Listed mounting 
box, then install one using the following instructions:

 

Disconnect the power by removing the fuses or turning off  

 

the circuit breakers.

Secure the outlet box (not included) directly to the building 
structure. Use appropriate fasteners and materials (not 
included). The outlet box and its bracing must be able to fully 
support the weight of the moving fan (at least 35 lb). Do not 
use a plastic outlet box.

The illustrations below show three different ways to mount the 
outlet box (not included).

To hang your fan where there is an existing fixture but no ceiling 
joist, you may need an installation hanger bar (not included) as 
shown above.

Outlet Box

Outlet Box

Hanger Bar

Outlet Box

Recessed
Outlet
Box

A

 

WARNING:

 

To reduce the risk of fire, electric shock, or 

personal injury, mount the fan to an outlet box marked 
acceptable for fan support using the screws provided with the 
outlet box. An outlet box commonly used for the support of 
lighting fixtures may not be acceptable for fan support and 
may need to be replaced. If in doubt, consult a qualified 
electrician.

NOTE:

 

You may need a longer downrod to maintain proper 

blade clearance when installing on a steep, sloped ceiling. 
The maximum angle allowable is 18° away from horizontal. If 
the canopy (B) touches the hanger ball/downrod assembly (D), 
then remove the decorative canopy bottom cover (C) and turn 
the canopy (B) 180° before attaching the canopy (B) to the 
mounting bracket (A).

MOUNTING OPTIONS

Installation

Содержание SEAPORT II YG991-MBK



















Отзывы: