![background image](http://html1.mh-extra.com/html/hampton-bay/seaport-ii-yg991-mbk/seaport-ii-yg991-mbk_use-and-care-manual_4187321007.webp)
7
Assembly
1
Preparing the canopy
Preparing the motor
2
Remove the canopy bottom cover (C) from the canopy (B) by
turning the canopy bottom cover (C) counterclockwise.
Remove the mounting bracket (A) from the canopy (B) by
removing the non-slotted canopy mounting screw (EE) from
the bottom of the canopy (B) and loosening the slotted canopy
mounting screw (EE) a half turn from the screw head. Next,
turn the canopy (B) counterclockwise to remove the mounting
bracket (A) from the canopy (B).
EE
A
B
C
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
3
Assembling the fan
Remove the cotter pin (FF) and clevis pin (GG), and loosen
the two collar set screws (HH) from the fan motor assembly
(F) collar.
F
E
B
C
D
GG
FF
HH
HH
WARNING:
Failure to properly install the cotter pin (FF) could
result in the fan loosening and possibly falling.
NOTE:
If a longer downrod is needed (not included), take out
the screw located in the hanger ball, lower the hanger ball and
remove the pin. Remove all three pieces from the downrod, and
assemble them onto the new longer downrod before proceeding
to the downrod installation.
Route the wires exiting from the top of the fan motor
assembly (F) through the coupling cover (E). Ensure the slot
openings are on top.
Route the wires through the canopy bottom cover (C),
canopy (B) and then through the hanger ball/downrod
assembly (D).
Align the holes at the bottom of the hanger ball/downrod
assembly (D) with the holes in the collar on top of the fan
motor assembly (F).
Carefully insert the clevis pin (GG) through the holes in the
collar and the hanger ball/downrod assembly (D). Be careful
not to jam the clevis pin (GG) against the wiring inside the
hanger ball/downrod assembly (D).
Insert the cotter pin (FF) through the hole near the end of the
clevis pin (GG) until it snaps into the locked position.
Firmly tighten the two collar set screws (HH) on top of the
fan motor assembly (F).
GG
FF
HH
HH
F