12
Assembly — Attaching the Fan Blades
10
Attaching the blades to the blade
arms
Hold the blade (G) with hands close to the blade arm (H),
align the key-slot holes (KK) with the blade arm posts (LL)
and press the blade down firmly. Ensure the key-slot holes
(KK) are properly seated on the blade arm posts (LL).
Firmly slide the blade (G) away from the blade arm (H) until
the blade (G) engages in the spring locking mechanism (JJ).
Make sure the spring of the spring locking mechanism (JJ)
is upward and the butt of the spring locking mechanism (JJ)
is against the edge of the blade.
To install the blade to the blade arm:
Press down the spring locking mechanism (JJ) to release
the blade (G) from the blade arm (H). Slide the blade (G)
toward the blade arm (H) until the blade (G) disengages
from the spring locking mechanism (JJ). Carefully push the
blade (G) up to detach from the blade arm (H).
To detach the blade from the blade arm:
G
H
KK
LL
G
H
JJ
The fan motor assembly (F) is shipped with rubber packing
mounts (II) to prevent movement during transportation.
Remove the five rubber packing mounts (II) from the fan
motor assembly (F) and discard prior to attaching the blade
arms (H).
F
II
9
Removing the rubber packing mounts
WARNING:
Failure to properly seat the blades (G) on the
blade arms (H) and engage in the spring locking mechanisms
(JJ) could result in the fan blades (G) loosening and possibly
falling.
