9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Ground
conductor
WARNING:
Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
Assembly — Hanging the Fan (continued)
6a
Making the electrical connections
WARNING:
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
WARNING:
To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
AA
Neutral
Hot
Black
White
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (AA) with your fan. Secure the
plastic wire nuts (AA) with electrical tape. Make sure there are
no loose strands or connections.
Make wire connections as follows, using the wire nuts (AA).
From Fan To Outlet Box
Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)
* There are two green grounding leads: one from the mounting
bracket (A) and one from the hanger ball/downrod assembly (D).
Turn the wire nut connections upward, spreading them
apart so the green (ground) and white wires will be on one
side of the outlet box and the black and blue wires will be
on the other side. Carefully tuck the connections up into the
outlet box.
A
D
Blue
Black
Green
White
Green
Outlet Box
