123
Operation
PN40HD
g
Select the button "OK" using the
◄► navigation buttons if you
wish to continue with formatting the hard disk, or the "Cancel"
button if you do not wish to carry out formatting .
Confirm the selection with the
Enter button .
Formatting takes a few minutes . When formatting has been success-
fully completed, a corresponding message appears on the screen .
Press the
Enter button to quit the formatting menu and return
to the main menu .
You can now use the hard disk normally .
System information
Select the submenu "System" and the menu item "System info"
as described in the section
"Opening the setup menu and
navigating"
.
System information such as the firmware version, HDD information,
Mac address, etc . is displayed under the "System info" menu item .
Restore works settings
You can restore the works settings of your device and therefore de-
lete (reset) all subsequent changes under this menu item .
Select the submenu "System" and the menu item "Works set-
tings" as described in the section
"Opening the setup menu
and navigating"
.
The selected menu item appears on the screen .
Use the
▼▲ navigation buttons to select "OK" and restore the
works settings or "Cancel" to cancel the procedure .
Press the
Enter button to confirm the selection and to restore
the works settings .
