40
d
Bedienungsanleitung
2.6 Motion detection
Motion detection turns the wireless LAN camera into a surveillance device. A movement or change in the area under surveillance is
detected and, depending on the camera’s setting, the system sends an image of the change/movement by e-mail or uploads it to an
FTP server.
The fi rst menu item enables you to turn motion detection
On or Off.
Identifi cation interval:
The system checks for movements or changes within the camera’s fi eld of vision at regular times: the
identifi cation interval defi nes the time (in seconds) between each check.
Limit:
Defi nes the precision of the motion detection in a range from 1 (very precise) to 6 (low precision).
Send snapshot as e-mail:
If the system senses a movement, it captures an image which can be sent by e-mail to a preselected
address
(point 2.6.1)
. Select
Yes
if you want to activate this function.
E-mail subject:
For entering a subject for the e-mail containing the captured motion image.
Snapshot to FTP:
If the system senses a movement, the captured image is uploaded to the selected FTP server
(point 2.6.2)
.
Select
Yes
if you want to activate this function.
Confi rm and save your settings by clicking
Apply.
2.7 System settings
This menu item enables you to select all relevant system settings such as password and time settings.
2.7.1 Camera information
Camera name:
For changing the name of the wireless LAN camera. This enables you to identify each camera without
ambiguity if your network contains several cameras.
Password:
Enables you to change the password for the user
“admin”.
The default administrator password is admin.
Password confi rmation:
As a precaution, your new password must be re-entered to avoid typing errors.
