Instruction Manual PUC 28
34
6.4 Interface configuration
Under Windows XP set up the serial interface configuration (COM port) as follows. The
process is similar for older Windows systems.
To find the interface configuration: Go to START
SETTINGS
CONTROL PANEL. There
click on SYSTEM and select the HARDWARE tab. Subsequent click on DEVICE MANAGER,
there select PORTS. Now double-click on the COM port which is used, therafter select the
PORT SETTINGS tab.
6.5 Configuration software
For a comfortable configuration and maintaince/logging of the measured values the PC
software
“PUC 24 / PUC 28 Start-Up Tool” exists. The software is available for downloading
from the Internet site www.halstrup-walcher.de
under the path “Downloads / Software”.
