halstrup-walcher PUC 28, Инструкция по эксплуатации

Страница: 13 / 51

Instruction Manual PUC 28
13
5 Setting the parameters
Setting the PUC 28 parameters is menu-
driven. The main menu is called using the “Menu”
key. This is followed by a request to enter the password. As delivered, the password is set to
“0000”. The password may be changed in the menu item “New password”. You may exit the
menu at any time using the Menu key. If no key is pressed for about 2 minutes, the PUC 28
automatically returns to the display mode. If you exit the menu and call it again within 2
minutes, the password is not requested again. In the following sections, the individual menu
items are explained in detail in the context of the menu tree (also see section 12 entitled
“Menu tree”).
The function of the keys changes depending upon the active menu item.
Key Name Function Effect
Menu
Call or exit the menu for setting the parameters
Scroll up
Navigate Selecting a submenu (moving the arrow)
Set a parameter
Increasing the number at the cursor or
changing properties
Scroll right
Navigate Selection
Set a parameter
Scroll the cursor to the right (e.g., selection of
the number of a parameter to be changed)
Enter
Menu selection Open the marked submenu
Set a parameter Confirm the value of a parameter
Table 4: Functions of the keys
Example: Changing the password from 0000 to 2600
current display
Key(s) Remark
In the following sections on menu description, it is assumed that the password
has already been entered and confirmed and the main menu has already been
displayed.
Call the menu to set parameters
The default setting of the password is 0000
and can now be confirmed using
“Enter”
Scroll up twice to mark the submenu
[ SETTINGS ]
Open the marked
“Settings” submenu using
“Enter”
PASSWORD
0000
VALUES
SETTINGS
7,2 Pa
21,8 °C
75,6 %rH
2 x