SENSITRON
A Halma Company
MT2276E
GALILEO 32
Manual (EN)
P. 8/14
Figure 2.5
Detector connections
2.6
RELAY OUTPUT CONNECTION
For the programming of the relays functions, the PC software is required. Any-
way, the relays 1, 2 and 3 are already set to trigger for System Fault (Relay 1 re-
dundant with Relay 2) and for Emergency (Relay 3).
Relays from 4 to 8 can be configured by the user. The relay output is a single
pole change over; this\ can be used to drive output devices that require a clean
set of contacts, isolated from the output voltage.
Figure 2.6
Relay output connection
