SENSITRON
A Halma Company
MT2276E
GALILEO 32
Manual (EN)
P. 36/14
The connection with the PC will be made by means of a serial port connected to
Galileo 32 through the related cable (see Fig. 6.4.4 b above), connected at JP18
-
Checking the connection (test command)
-
“Test Command” lets you check whether the control panel and PC are
correctly connected. Whenever data is exchanged between the control
panel and PC, a password must be entered to establish the connection
(Serial Password). The entered password is compared with the one
that resides on the control panel and the connection is established.
The default password is 000000 but can be changed by clicking “Change Con-
trol Unit Password”.
Warning
The control panel cannot be accessed if the new password is lost.
“Download Configuration into CPU” lets you download the system file created in
the GALILEO 32 control panel.
Figure 6.4.4
c) Insert password
Figure 6.4.4
d) Serial password change
Figure 6.4.4
e) Save control panel event
log request message
