Hall Technologies 2/1/2024
Page 12 of 28
Devices, Activities and Settings
DEVICES – Add Device, Commands and KP Commands
It is recommended that you start with Devices first and the 3 tabs in order:
1.
Add Device
–
Either update the Hall Devices IP Addresses or add new device connections.
2.
Commands
–
Use the prebuilt commands for Hall devices or add new commands for devices
that were added in the previous Add Device tab.
3.
KP Commands
–
These are commands from the KP8 API that can change the button colors or
control the relay. About 20 default commands are available, but if you need to you can add
more from the API. A full list is in the Telnet Commands section, later in this manual.
