Hall Technologies 2/1/2024
Page 21 of 28
Devices, Activities and Settings
SETTINGS - System
This tab has a lot of admin settings that you might find useful:
•
Web User Settings
–
Change the default username and password
•
Web Login Time out
–
This changes the time the it takes for the Web Page to go back to the
login
•
Download Current Configuration
–
You can download an XML with the device settings to either
update manually or use a backup or use to configure other KP8s in similar rooms.
•
Restore Configuration
–
This allows you to upload an XML that was Downloaded from another
KP8 or from a backup
•
Reset to Default
–
This will do a full
Factory Reset
of the KP8 and it will reboot with the default
IP address of 192.168.1.150 and the default username and password of admin. A
Factory Reset
can also be done from the front of the unit, just below the USB, there is a pin hole. Stick a paper
clip in the whole while the unit is powered on, and it will reset.
•
Reboot
–
This is a simple way to reboot the unit if it is not operating properly.
