vario flex
Installation
34
Order h49 7144.907-333
1. Unfasten the clamping nut and unscrew it approximately
4 mm. This releases the clamping ring.
INFORMATION
By tightening the clamping nut the clamping ring turns
inwards. During the subsequent installation process in
the clamping device, the clamping ring acts as a limit
stop for media delivery to the machine.
2. Screw in the clamping nut and tighten it to the specified
tightening torque of 5-10 Nm. This clamps the gas pres-
sure spring.
